Why dim pecky and how to correct it independently?

Zgornuti

Home lull is an important element of the life of a people, and if you run into trouble while fighting a provocateur. One of them can be a dim, which goes from the opaluvial system to primacy. For the uncommon witnesses, the situation is similar to the situation of being away from a private booth. In order to correct the incident, then go back and forth, as the reason for the name of the stove.

The main reasons for the delay

It's easy to dim at the booths, and not on the street through a pipe - this is a reason for the joke of breakdowns in the opaluvalny systems, for the installation of time-consuming repair robots. The reasons are the majestic masa, ale їkh usunennya of the needs of the zusill, іnstrument, knowledge.

Loose traction

Boo, you should be able to fix the middle of the booth when you first start the system. The first time gentlemen ask themselves for food - what to dim a new pich was established by the rules and recommendations. Consider the main reason for the drop in the stagnation, or weakening of traction, as the role of the opalum construction is important in the robot.

Bringing food to pulling for normal

In duct, kovpak and іnshih tseglyannyh furnaces, there is a strong pressure, which is not a trace of overwhelming, overheating the system to the overwhelming demand for heat.

When trying to force the strain of the system, it is practical to try to fix it in the dim, as the design cannot cope with the dim, but go to the dimokhid.

Don't be rude at most

Insufficient flush of water

For the burning furnace, the fire is necessary muslin - it’s all about leather, but there’s a little bit of reason, but for the correct functioning of the furnace and dimar, a sufficient number of food is needed.

Do not walk in a severe frost tightly close all the doors that window, but if all the same it’s been forgotten about it, and to dim at the booths, then you can try to hide the situation, having seen the quater, or simply failed to open the door.

View Quatir

Throwing thrust

Practically uncontrolled process є reversing the draft of the opalation system. Buvak, scho navit new pich dimit, when the weather is strong on the street. Do not panicuvati, as soon as it’s overwhelmed for some reason - call out to the windshield, and the operation of the stove can go on in the snake mode.

Structural failure

The most obvious reason for dimming at the booths can be caused by an incorrect installation, installation or equipment. In case of damage to the construction, start to drink badly, often dim with small doses of bran food, and then start a big club for dima.

As soon as the design itself was incorrectly installed, it happened that the opaluval system was repaired, and I often rebuild it.

For some vipads, you can get by with a piece-by-piece shift, call it up with such design changes:

1. Rozkol tsegli in the top,
2. Trіschina in dimarі of a small size,
3. Vivedennya at the fret of the pedal,
4. The collapse of the middle of the furnace.

Well, well, the ruin in the design was honored, more beautiful than the redistribution, so a partial repair might not help, and the system will be ruined and in the future

Oven wear

Incorrect operation of the firing system and may cause excessive wear of the furnace through improper operation or frequent forcing of the furnace. With the knowledge of the design, on new occasions there is a development, which is the most frequent and to bring dim down.

As a matter of reason, there are still great tremors or breaks that can lead to a breakdown, and if they do, it is necessary to repair the robots.

Great trenches

Soot in dimar

The most common reason for the wrong robotic flow is that of the blackout dim in the middle of the midst є traction is rotten, through the smudge of the soot pipeline.

In case of such problems, it is still important to quickly clean the dimar from the accumulated soot, to be careful for other additional attachments: a golik, a yorzha with a weight or with tools.

With the help of prophylaxis, once a day, it is necessary to drown the food with aspen glades, as when burning, the soot must be fed at once through the pipe above the roof.

Dimar's prevention

Description of real situations

If you dim the pekty, cause it is necessary and it’s necessary to get overwhelmed, then on a weekly fakhivtsya you will call for an hour - it’s necessary to solve the problem independently. Regardless of the person who dims the phone at the booth, there is a problem, such as repair robots, and the wrong function in the opalescent system.

• Dimplenie pid hour of promotion;

Often, if you do not change the cravings, and fix the operation of the opaluvial system, the gentlemen do not think about why you should not be able to change the power for an hour, and everything has been working correctly recently. Quiet, hto know the physics, similar situations do not pour out - we dim go to the dimar, and not to the side, the active streams are needed, so it’s a thrust.

Even if it’s a bit colder, it’s colder than it’s because it’s okay, because it’s sometimes at the booth, then there will be no cravings, but it means that we’re going to be in the middle of the house, because it’s not burning. That slid in front of the team yak roztopluvat opaluvalnuyu system, to reconsider the cravings.

In order for it to be more saturated with gas due to the design of the furnace, the cold draft is responsible for the greater force. To reconsider, chi thrust, at the opening of the firebox chi of the blower, for the help of the candles, chi sirnik, to revise the external thrust. The fire from them is guilty of pragmatically in the middle of the stove when it is brought to the blower or the firebox. Most of all, if half the time is gone, it means the quality of oversupply of wind streams in the bow and peck can be drowned.

• Unsatisfactory definition of the earlier correct oven;

For the first time to dim the pich at the booth, and you don’t know if it’s robotic, the craving to finish is good, but it’s all the same to go to the house, you can win the stove design. In case of tremors and breaks at the treasure, it is colder to come up in the middle and make the system function correctly. Tom often dims the tseglyana pich, navit at a charge. It is necessary to find something at the treasury of the construction and to use it, it wasn’t trivial to ruin the stove. The first problem is not going to be corrected in the treasure;

• Dimming when the fan is closed;

Through the lack of fresh spirit in the community, we can suppress the knowledge, and when we correct the situation with the blower, we can start to get even stronger. The only way to get around this problem is to open the door. Dodatkovo price to replace vitrata paliva.

Ale buvaє, scho such dії don’t help, but the dimplenja will take advantage of the new skinny slough. That’s the reason є dimokhid, but it’s overgrown with soot - it’s okay to trample through inaccurate fire, or improper exploitation. The problem can be violated simply - it is necessary to clean the dimar from soot, and the operation of the firebox turn to normal mode.

• Name on the cob exploitation;

If it’s not too dim and you stop writing the program, then it’s better for everything on the walls of the design, the balls of graphite soot were set. It’s a very special process and it’s normal, but it couldn’t work correctly, it’s necessary to clean the pipe.

• Dim from the golden oven;

If you want to diminish the value of the punch, or if you stop, in order to progress, you need to normalize the process of exploitation. For a whole collection of information, it is necessary to reconsider the purity of the Dimar - it is possible that there are some doubts. Even though soot is not found in the middle, it is necessary to reconfigure the horizontal line of the pipeline in the middle of the pipeline, so that it is called a room knot, to the appearance of sagging. For a correct robot, it is necessary to have a distant end (one hundred percent of the furnace) of a horizontal column, growing by 6 centimeters in the middle. Since the specialty will not be realized in the dimar, the traffic jam is not lost, but we block it, so it’s called.

• Pekty repairs equal dimity when the firebox doors are opened;

If the craving is less normal, and if it’s fed a lot, then when the firebox doors are open, you’ll get an old dim, an equal number of dim, you’ll go with her. At the same time, if you need to, change the direction of the stove: fix the gate and close the blower.

• Dim puffs from the firebox before opening the doors for an hour;

The skin can not cope with a lot of dim, when trying to force it, if it’s unnatural, the opal construction cannot cope with a lot of dim, but it’s wobbling, if it’s a good day.

In some cases, it is necessary to spit dim through those channels, but one of the channels is sucked in soot and clogged smitty, so you need to clean the entire structure from soot.

• Dimit nova pich;

When the firebox doors are opened and the dimity is repaired, it means that the design is not installed correctly and the system will need to be rebuilt. You can, incorrectly, designed system details:

1. Dimar cannot function through incorrect installation
2. The firebox doesn’t fit the dimmer.
3. The Zanados vuzky dimar cannot cope with the amount of fire necessary for the program to burn.
4. Incorrectly thought out the robot of the opalation system

Inodi buvak, you can reconstruct the picture and get around the dim's entrance into the community, add the whole structure and try to make it important, as this part cannot be done correctly. As soon as you have violated the ceglyana pich, then you don’t have to go to the master's hand, because you have the power and you can do it for the wiklik with the help of fakhivtsya.

• Reconstructed pich dimit;

Consider identifying certain situations through those types of furnaces that are used for the reconstruction of systems that burned the old device, are not protected for robots with your system. Buvagh, scho a podbana, the new firebox is too tough and the design cannot cope with the number of changes and flows of dim, like the viroblyaof the firebox. In any case, it is necessary to add a weakened firebox and reinsert it into the opalescent system.

• Shortening for an hour of robotic systems (for example, plates).

Call the price if it’s a heat-generating device, it’s working through a sleeping connection. Shvidshe for everything became overgrown with soot that the attachments ceased to function normally. Well, the whole construction of the bullet was installed not long ago and if it was installed new, then, perhaps, the installation of the bullet system was wrong, and the special features of their robots were not impaired.

Visnovok

Some of the reasons for the dimming of the stoves near the booth, the traction and design, are all overgrown with soot. At the same time, if the system began to grow "fluffy" soot, then it would be necessary to clean it with a termine, some of it could be sprinkled, but it would not be safe.

As soon as you turn the dimar into a soot build up and clean it up when it gets jammed, then it’s slowed down to get rid of it, or it doesn’t get stuck. So it is itself necessary to constantly overturn the whole structure for the purpose of small incidents, tremors, breaks and so far - the stench є is often the reason for smothering.