One bedroom with your own hands

Once I was intelligent, but in my booth I didn’t look more than one slicker, on which it would be possible to grow up a visit from a relative of a friend who had a good friend. In addition to the fact that new furniture is being bought, I am personally growing.

Necessary tools, materials and project lizhka

How can you make a single bedroom with your own hands? The price is not so neat, as you can get up. I made it to the robotic leash in one day. At the same time, it’s because of the low furnishings before the hand, I didn’t have so much tools - a wall saw, a hand drill, a small electric plane and a line-cutter.

The main (albeit not unique) material for the implementation of my project was 5x10 cm boards, and I saw a crossing of coniferous trees. In addition, I had three boards 5x20 cm, one 5x15 cm, one 5x25 cm, nareshty, two bars 5x5 cm (for all sawmills - 240 cm).

Decal about the construction of the lid ... On the inner side of the fence, 5x5 cm bars are attached, and a rake bottom spirals on them, so the mattress is put on. If it’s more beautiful than intelligence, if you’re saying something, look at the little one who has a cross-sectional growth.

When making a reservation for the preparation of furniture for alarm sawmills, the choice is even more respectful. Ale the frame of our lid, for happiness, the pads are important and mild, but a slight deformation of the board is not terrible - a defect will be easily corrected when the design is folded.

If I want to get the latest sawn materials from the planes, the quality of the pre-sale processing is not enough for the furniture projects. Oskilki, as I have already said, I have lost part of my tools for an hour, including a planer and a jointer, which are suitable for my needs an electric plane. For one pass, the width is not more than 7-8 cm, therefore, for the processing of wide boards, a number of parallel passages are required. As a result, there were not many irregularities on the children’s boards, as well as, however, I easily drove for an additional slicker machine.

On all the critical edges, I cut a 6 mm chamfer, turning the cut of the boards up to 45 degrees. Round off the edge of me to add the same electric planer. The chamfers on the ends of the boards, I will hassle by hand, scoring with a snake knife.

Now more words about the design of the lid. Vaughn is stored with two backs, with a single fence. Lots of broken from two lay one to one 5x15 cm boards with a clip for fastening the sidewalls. I am encouraged to take photographs, to supervise the article, and the armchair of a single-bed sled made by my own hands from a tree will help you to brighten your eyes, as it is necessary to work.

With a little bit I planted on the backs of the smooth vigin, ale oskilki at the moment of awakening, I spent an hour of adding to my jib saw, bringing down the straight bevels.

Folding single bed

The horizontal elements of the backs are closed with 15 mm wooden furniture pins. With a lot of back leash, one (internal) іf two 5x15 cm boards, scho to fix a small one. Before the time, open the holes for the pins, I hopefully fix the offending elements behind the other clamps and hardened all the way through the offending parts. Tse guarantor, how open the door will be exactly one against one, be it a visitor.

The presented diagram shows how to open the parts for drilling the openings on the pins.

Nyshirisha doshka, as I vikoristovuvav for the preparation of the back in an uzgoliv lizhka, the bullet is trocha curled, if I am stiff with clamps, fix the opening, I won. By making the construction of the glue, the pins are placed on the glue and the pins must be removed from the deformed board at the straight line.

After hammering in the pins, I have seen that there is a small gap between the horizontal boards of the back and the legs of the back.

I didn't have enough great zatiskachіv, zdatnyh hunt the width of the sled, so I squeezed two small bars to a horizontal board and also vicorized bars for attracting elements one to one. The insult is tightened in a whole lot, so that if you come across a similar problem, I recommend that you pick up only metal ones, as you drag on with gwent.

If you are more likely to solve the problem and you will be given a foldable one, you can replace the pins with 10 cm screws in a simpler way. The design is not so hopeful, but it’s all the same to finish it off, and if the screws are tightened, the gaps disappear.

I went out of the back of the uzgoliv with the inner halves, I went through the surface with an electric plane, and then put on the glue other, called, parts of the little ones.

The whole stage of the robot is not so simple, as it is possible to build a spat where a great amount of glue is applied to the product before the details are glued together when they are squeezed in clamps to read "float", tobto. zm_schuvatisya usually one one. One zatiskach, as shown in the photograph, is positioned perpendicular to the grid, which allows you to more beautifully fix the details.

Uninvolved in all my efforts, the finale still had a reduction of 1 mm. However, such an insignificant shlyub is easy to build on the basis of additional service. One hour, I smoothed the kuti nizhok with an electric plane. On the inner side (the order with the back), I didn’t go as fast with an electric tool, I’ll bring it to me with an extraordinary plane.

For the preparation of family fencing, I vikoristovuvav 5x20 cm boards with a size of 240 cm, which have grown up to 200 cm at a height of 17.5 cm. To the lower inner edge of the dermal abdomen, I glue the screws with a 5x5 cm block for additional glue, and small wood blocks are glued to the new 15 cm through the skin, which are guilty of fixing the bottom slats.

Nareshty, ready-made fences fixed on the signs of special virages of nizhok. I vikoristovavav on the width of 65 mm screws on the skin end of the board. For the scent of the stench, the trochas are short, but they just didn’t appear by hand.

The І axis is the frame of the rake on the rails, overlapping the rake bottom. Behind the irony valley of the vikoristani, the slats were pricked by me, for a long time, I knew when the old sled with a spring mattress was taken apart. (I’m not a great shanuvalnik of spring mattresses. On my dummy, on the fly, if the mattress is laid on a river day, so it’s a bit of a misnomer to get rid of old speeches.)

I am pleased to know that, broken with my own hands, the one-bedroom bed was so smart and superb, and on this point I have been vitratic for so little hour.