Іmіtatsіya tseglyanoy stіni with their own hands in children

As the development of the sense of the tseglyanoy stini, it is very difficult to think about it. And you don't want to go out of your way. For the whole it is necessary to have a wide base of some kind of nonsense. Aje tsegla to fill up with a lot of importance. There are a lot of options for the growth of healthy masonry and the construction of the construction.

We are happy to help you to try to adapt the quality of life, and you can find the best option. So you yourself can on the video in the whole statty and photo marvel at the best design.

Natural style from czegli

Well, in the room є the tseglyana wall, enough to take the upper ball of the obrob, the masonry is ready a little more and the tseglyana is ready. At the same time - the truth will be kept by the wards of the wall. To be overshadowed її just pofarbuvati and paint with varnish (div.).

• Sufficiently clean the top of the filler, take a sanding machine and an emery disc and a cleaning machine. Shvi mіzh is completely smeared with special confusion, and you can also help to fix visible irregularities and defects.
• For example, you can cover the surface with wax or a special varnish, and the materials can be suitably used for enhancing the natural style. If you don’t bore a blinking surface, take a fine-grained emery and grind it down to a matte finish.

Do not forget to forget, well, knowing the obrob, you can rarely create an ideal masonry. Ale є vihіd - іmіtatsіya pіd natural tseglu. This is a reasonable option, which does not require the use of additional food.

Yakoyu buvaє імітаційна pegli processing

Chim іmіtuvati tseglyanu wall at the apartment on the facade? How can you create the masonry itself?

Let's look at a few options that can be easily implemented in home minds, even the stench doesn’t take out special tools and special tools, and you can use your hands to make it happen. Todi and kintseva price will not be high

Decorating the surface with decorative plaster

Vikoristannya gives a quick result and it doesn't matter. You can use your head to rescue those who do not need to guide the robot along the smooth surface, everything is covered with a ball of plaster.

You will have a chance to use the following tools:

• Primer;
• Roller or wide brush;
• Decorative plaster;
• Wide spatula;
• Farba;
• Decilka ganchirok;
• A small handle, or a zvychana mace.

For additional stitching in natural treasures, seams are installed, we do not know a whole set, for plaster there is enough handles, a stack of hash (a stick for drying), a stitch of any kind of object, as it is easy to make a simple and non-glib seam.

From the same:

• Repair the varto from the preparation of the surface: check the foreground fixing, grease all the openings, clean the wall from the saw and prime it. Decorative sumptuousness is prepared for hanging the ball of runt: on the packaging of the virobnik, add the necessary proportions, collect the required amount of water, blush the powder and add the barvnik. Remain not obov'yazkovo, if you just need to make a picture of the wall after applying the plaster.
• It is not necessary to fix the whole pack at once, it is enough to distribute the warehouse on the first port, then step by step to strip the skin meter of the wall, before, like the masa, it is applied, it is hardened. Ideal disagreement does not interfere with the stiffness, it is innocent of the clots. If you reach a good consistency, it will come to robots. Vikoristovuchi trowel and spatula (div.), Apply decorative sum on the area, equalize and clean up the excess size of the wall. It is not necessary to swell to reach the smoothness, splinters of the grain, by itself due to the shortness and small chips.
• Then the attack starts until the next stage - the visibility of the whole masonry is robust. Naturally, їх size can be pretty, but it’s all the same more beautiful, but the stench is not much more pronounced from the earliest, so that the stench will be more realistic. If you don’t play in your own, boldly take the line, you can also find a geometric vivirenity.
• Behind the still unhardened mass with a dry stick, one can easily recognize a line, such a rank, a little masonry, a razchin, which can be seen through a line, can be easily recognized with a ganchirka. Dalі start to the new dіlyanka and so until the docks the entire surface will not be crumbled. Give the hardened part of the piece, the fragments of a little more time to be recognized as a vizierunka.
• Pidsohlu sumish is easy to clean with sandpaper, so you don’t only know the excess material, but correct the seam, in the end it was necessary to clean the saws. If you want a farbuvati wall, if you have left, then do not forget to prime it, so the farba will be trimated more. To increase the level of maximum similarity, you can vibrate different views.
• Є One more way: a little bit of a wall to be covered with a ball of gray plaster, or if you don't need to flush and flatten. In the case of the rosters, it is possible to add a barvnik, sumіsh, scho viyshla, it is uniformly applied on the wall and on nіy prokrelyuyut sewing. The breeders before the barvnik, in the lines, where they left, are covered with color plaster, it is necessary to clean it up, and as a result, you will remove the optimization from the natural wall from the barn.

Іmіtuєmo laying behind additional pіnoplast

It is also easy to decoratively create polystyrene or polystyrene on its own.

Alle, before the ear of the robot, it is necessary to add the following tools:

• Great sheets of polypropylene;
• Marker;
• Dovga liniyka;
• Stationery nіzh;
• Tile glue;
• Decilka of cans of farbi (div.).

Before the hour of preparation, carry out the layout of the sheets of polystyrene: behind the additional line and marker, there is a small standard size 7x15 cm, do not forget to cut the seam allowance.

• We use a clerical knife to draw out the pinoplast and get the area.
• Know the ball of obrobka, open it with grease, it’s just plain and not forget about the ball of runtu. On the prepared wall, smear glue, then step by step the glue is glued; do not forget about the gaps, between 2 mm of skin is enough. In addition, as all the elements will be fastened, they will start up until the farrowing wall, just resemble a farboy seamstress, and do not forget to see patyokas.
• In order to reach the maximum similarity, it is possible to apply chaotic chipping and grunting on the pyoplast in advance, the wall will be finely rubbed out, altogether similar to the original masonry. Ask for a unique invoice to finish just for the additional virizanoy of canned plaques. It is also a varto part of the tsegli pofarbuvati іnshoyu farboi. Pidbiraemo as much as possible similar views and forward.

Textured tapestries

Use special trellises, show natural masonry. Even though it’s still rocky, because there are some extravagant tapestries, it’s at once the modern technology allows you to remove the reference textured tapestries, for some reason, there’s no way to see it from the large masonry, but it’s easy to see.

Textured tapestries can be added to the plus:

• Low partiality among porousines in the described ways;
• Visoka speed of installation;
• Easy to look at - trellis can be tied, and on the surface there is no accumulation of saws.

Uvaga: As soon as you violated the tapestries themselves, then at once special options appeared for the sale of the printed polymer on the papier - such tapestries are even more realistic.

Imitatsiyna panel is ready

Go with words, rely on respect for a ready-made plastic version, de the surface is identical to natural treasures.

• It is enough to buy a panel that extraordinary tapestry glue that will rewrite your wall for a few years. With a lot of stench, it is equally good to be victorious in the most recent fashion. In order for it to be glued to the panel, it is good to trim it, it is necessary to go back to the wall, do not forget about the primer.
• As long as the wall is not equal, then you must change the size of the area. The price can be covered with plaster. As well as the internal surface, it is possible to build it up for additional gypsum board.
• Another option is great in that you can build and insulate the wall.

For the sieve vibration, you will need to work with two materials. Tse metal that wood.

Stencil embossing

The process is carried out along the plastered surfaces. Take a ready-made stencil (zazvychay from gumi chi polymers) from applying a masonry relief. Here we can see how we can see the image on the wall.

• When working on the side, it is necessary to pour water over it, you can simply cut it off with a spray bottle. Writing is required neatly, slightly squeeze the structure to the surface.
• Take a look at it for a few seconds, carefully see, in the ideal on the wall the contours of the seams should be lost.

Having finished part of the wall, repeat the operation again. In the edge, it is important to rukhati stencil on a new part of the wall with urahuvannyam already broken lines and masonry, inakshe viyde svistoplyaska.

• The hardened ball of plaster must be primed or coated with wax. For that, the yak on the surface is dry, it will start until the farmstead. Obviously, it is possible to do without it, because it’s too early to add a few color additives to the plaster. As soon as they did it, they needed to put the plaster into a ball of balls and do not forget to smooth it out. The results will be even more similar to the color of the real tsegli. Do not forget about dodatkovo farbuvannya shviv.

Vibrayuchi farba, do not forget, when you hang up, you will become dark!

Figurna tile masonry

Tsey option is primitniy in the way of installation. As soon as possible, you take the ceramics ready and just glue on the prepared wall in advance. The process will be similar to the extraordinary lining with cakelite tiles;

• The gap between the tiles must be covered with glue. If only the seam is raised, it is necessary to prime it or paint it with varnish. Chefs in the process of farming wines save their color.
• I’m not ready for a tile, if you have a lot of non-use of that Bulgarian, it’s easy for you to make the tiles yourself.
• In principle, it is possible to make tiles from wood, plasterboard, tile glue, corrugated cardboard, more details are shown below.

Lined tiles

The process of making a nagadu applied print bit behind an additional stencil, here we also know the plaster.

• It is applied to the area of ​​plaster and ironing, such a rank is used for a vague relief, which would be similar to the texture of the cegli. Yak tilki stіna trochi pіdsohla - an attack before the robot. It is necessary to paint the contours of the zeglinks. It is simpler to try to go through a line, ale todi vyde zanadto strictly, more beautifully little contours without any attachment, so it will be more natural and chaotic.
• Having finished the drawn contour, it is necessary to take a high scraper and clean the plaster, by yourself having seen the contours of the cegli. As a result, there is little loss of death, it must be cleaned for an additional extraordinary ganchirka or brush. Try to make sure that you see some kind of krykhti plaster in front of your team, yak vona zakam'yanin.
• The onset of obrobka is similar to that described in the stencil method.

Tsegla on shpaklivtsі

If the wall has been prepared, feel free to choose the option. On the area, it is necessary to apply a light ball of putty with a color additive. And far away from the front, just a tiny outline of the masonry on the surface, just a little caught.

Before the speech, relєf can be zrobiti shvidko that just vikoristovuchi wake-up tape.

For the day of the need:

1. Mayuchi dry plastered area, it is necessary, having become aware of a marker or a felt-tip pen, rosemititi shvi. Believe me, the skin of the offensive row is guilty of wandering about before the front, because you have a prison grati, but not masonry.
2. If the seam is ready, it’s necessary to make it big and small, while the farba is dry.
3. Yak tilki farba is visokhne, it is necessary to stick the smoggy tape with scotch tape, and then stick a thin smoggy tape on them. The price is necessary for a small, easy-to-use adhesive tape.
4. A light ball of putty is applied over the hill, the smoothing is not necessary, it is possible to overwrite all the yak є, only to see the original structure.
5. Yak just putty putty buried, fix the scotch tape right away. Oskil stinks are glued together at once, it will be easy to see all the scotch tape.
6. Now it’s chekaymo, for now it’s gone.
7. Yak only the area is visikhaє, you can start before processing the surface in a specific way.

Імітація corrugated cardboard

Іmіtatsіya for additional material given - the most innovative and simplest way of decorating a style.

The robot should know the following speeches:

• Corrugated cardboard - as a matter of principle, it is not necessary for the buyer to take all the cardboard boxes for the sake of swelling, by-by-by-by-by-piece attachments, and in the same;
• A wager of a pack of papery servetka, obov'yazkovo shilnyh;
• A few cans of PVA and wide penzli;
• Glue gun, hot melt glue;
• Gostriy vuzky nіzh (pіdіyde office);
• Olivets that great line;
• Farba, varnish.

Now let's talk about the process itself:

1. Yakshcho on the wall of boule trellis - obov'yazkovo runtumo to the surface, and yakshо farba - chischaєmo that zezhiryuєmo.
2. Narrowing of corrugated cardboard for the size of the solid surface of the carton, for a loan of one hour.
3. Razmіchaєmo stіnu, so be the glue of our "tseglini", alope, but the row is guilty, so that the masonry came out, and not the lattice.
4. Dal namazuєmo PVA cardboard, ale є trick, on the cuts the corrugated cardboard is guilty of being dry, then glue is applied from the gun. The staff of such a simple combination can be quickly fixed on cardboard;
5. Now the most common stage. We take paperwork servetki and decorative cardboard whole by gluing. It’s not so foldable, as it’s built, it’s necessary to apply glue on the surface of the rectangle, and then stick it on the servet, yak maє buti is covered with glue.
6. At the stage of gluing the servet, formulate the sewing carefully, there is no need for any special tool, you can take an old man, or just press it with your finger, such a rank of stench will be inserted into the wall. It is necessary to develop for the smoothing of the gostryk regions "tsegli", since we ourselves need to achieve the maximum similarity with respect to the background.
7. At the final stage, if the whole wall has dried up, the decorative paintwork and varnish applied must be repaired. The varnish can also help to preserve the performance of mechanical items. Hanging, the decor of the wall will be as similar as possible to the Tseglyana.

Uvaga: The robots pick up only thick servet, and just get the stench wet with glue.

Before gluing to the surface, try to summarize at the valley, in this order to remove the folds, which, as a result, repeat the texture of the grain. More beautifully, you can vibrate servetka white colora, inakche, you can go like this, s-pid farbi will show the best natural color.

Nuance and add design

Vibrating imitation of masonry, it is necessary to vrahuvati, well, you may not just bring a rod into the interior, but rather stifle the design with your own chimera.

Until the earliest work, I will need to know how to see the room with the help of the process. You can make your life original and quiet, and whatever vibrate is possible, you can be sure of it, even if it is from the descriptions of the food options that are natural for the treasure.

Before the speech, the technology can be used to decorate the whole masonry not only on the walls, but to decorate it with such a rank of vases, furniture items, by themselves adding a splinter of elements into the design.

For additional imitation, you can find unique babies. The stench can be done with the original and beautify be-yake primitive

So it is very pleasant to see and see the openings, it can be seen or the doors.

Likewise, behind the additional imitation, one can know the tsikavi of the decision and before that.

For the help of such a decorative amenity, you can grow and improve your surroundings. It’s not always possible to build on walls.

Decorative freshening up for the whole can be seen well and be cinnamon when simulating the working part of the kitchen. Even if you take the panel, then it is not just to take the wall from the vologue, but you are kind enough to see it.

Likewise, you can і zonuvati privіshennya, see the most attracting mіstsya in prіtіnіnі.

Imitatsiya tseglyanoyi stini with their own hands on the right is not folding, but rather creative. May your imagination, and you can create simply masterpieces and instructions to help you with others.