Decorative plaster with your own hands

Seasonal improvement is both internal, so it is not exotic at all. A suitable way of decorative freshening has already gained popularity among the whole world. However, do not be hungry for obscenity to allow vikoristovuvati for decorative fixation of the ceglu. A wonderful alternative, decorative plaster pid tseglu, can come to a wide range of help.

Reconciliation of the given technology

Among the main pluses of the stin "pid tseglu" plaster, it means:

• A lot of materials are available. Ready plaster sum_sh at a rozrakhunku for 1 sq. m stii will cost a fraction of the price for the lining of the tseglu.
• The simplicity of the robots is remarkable, especially in the case of sparse brickwork. Іmіtatsіya tseglyanoi masonry can easily be bought by the viconan with his own hands for the wipes of the cob earbuds for carrying out health-improving work.
• Magnificent assortment of colors and textures. On the up-to-date alarm market, you can know whether a variant of decorative plastering sums with different technical characteristics is intended for both internal and external robots.

Іmіtatsіya tseglyanoi masonry: options and їх features

First, start before applying the plaster with your own hands; In the arsenal of mulyarov there are a number of types of decorative masonry, which can be used for the texture of the grain, її color, options for stitching seams. It can be a "high school" clinker, wobbly cladding and stylization from the ancient times of old times. A stagnant type of masonry can be a meaningful world of varied internal interior room, a superb view, or a rough view, or an accurate and geometric vivirenium.

Hand plastering tools

If you violated the whole robot on plastering the walls with your own hands, you can know the following tools:

• Simple chi laser r_ven.
• Set of spatulas.
• Cologne.
• Sokil.
• Grater i napivterok.
• Rule of virivnyuvannya stin.
• Plaster screen.
• Vіdro chi korito to change the roschinu.

Similarly, with preparatory robots, a pick or a small pick can be used to match the walls. The whole simple tool can be found in any wake-up shop.

Preparing a wall to a robot

Before we start to apply the plaster on the wall, it is necessary to carry out preparatory work. Some old plaster can be seen at once with tapestries and other well-worn materials. In order to get rid of the wall, it is necessary to conduct an assessment for defect defects: curvatures, tremors, vibrations, etc.

Pislya virivnyuvannya stin, it is necessary to grind with a special primer for cement and steel surfaces. Tse to preserve the painting of decorative plaster sums from the surface of the wall. It is also recommended for professional plasterers to add PVA glue to the primer. It is possible to significantly paint the adhesion (penetration, heat) from the style.

Razmіtka walla

To get used to it, it is planned to apply decorative plaster not on the entire surface, but on the yaku part. In this vypadku, for an additional person, the boundaries of the "masonry" on the wall are indicated, and the sieve of the wall is isolated with masking tape.

Applying decorative plaster

To prepare the difference, I’m ready to drink dry sum, yak, to dilute it with water. For the whole we take water at room temperature and give it a dry sum in proportions specified in the instructions from the date of supply. Such instructions are given on the packaging and regulations for preparing ready-made products, as well as for technical reasons for purchasing them.

Otrimana sumy is guilty of making a thick consistency, usually trimming on the surface of the walls, not fiddling with food. For a short imitation of masonry in the plaster, you can add a color of color - chervonia, zhovty, siry to your dummy. So the masonry will be more realistic.

If the viglyad is based on the base of the tseglyana wall, then it is worthwhile to apply the rosters with a thin ball. So it is possible to preserve the relief structure, so that you can lay down the shape of the ring "tseglinok". A wide spatula is used for the application of a wide spatula; Pislya ts'go von smooth, razgonistny rukhs rise to the surface of the wall.

At the same time, a particularly smooth surface of the walls is not required - the short surface of the surface can best convey the texture of the solid masonry. There, the girls planned to deprive them of the disseminated masonry, having pasted over the surface of the walls with masking tape, so that they could be seen.

Formuvannya okremikh "tseglinok"

For that, the plasterer’s madness on the wall is slightly dry (ale, it’s not easy, it’s too plastic!), Then proceed to the molding of the masonry. For a whole lot of space on the plastered wall behind an additional tape measure from top to bottom of the swamp. Tse nadal will be "shvi" of our "masonry". The width between the swarms needs to be the same - let the height of the wake-up tsegli become 8 cm. Approximately the same size, and then, should be trimmed when growing for greater realism, until the right time. However, there is no special role to play here. It is important that those who will be seen in the out-of-the-box communication of the style and of the 100-percent specific inter'er of attitudes are important. Zvychayno, how much zrobiti zanadto is great tsegla, є risik, how the stench will be seen like farbovanі cinder blocks.

Then we take a straight, thin object with a thickness of about 1 cm to see the "seams" on the wall. Tse can be a thin metal rod, a chi pipe of a wood club. We see a wooden glazing bead, which you want to fix for fixing the frame in a tree frame. On the other hand, there is a visually horizontal "seam" with lines of design, slightly flush into the plaster.

In addition, as horizontal seams on the wall will be ready, it will be necessary to create vertical seams. At the same time, the masonry must be rolled up, but the vertical seam of the masonry must be applied in the check order, repeating the little ones "perevyazuvannya" tsegli in the treasure. Zzvychay dozhina tsegli become 24 cm, even, and appear between vertical bears on the wall, but approximately the same.

Finishnement

In addition, if the robot has finished shaping the area around the wall, then proceed to the final processing of our "masonry". Here you will find the widest space for empowerment. "Shvi" for greater reliofnosty can be fabulous with a dark farboy, or navpaki - seen with a big color. The remaining option is recommended, if you want to winterize a noble veneer. Before the tsim, the masonry can be covered with an emery paper for a better smoothness.

Farbuvati wall can also be found in all types of red, brown or gray color (if you did not give barvnik plaster sumish). The finished wall can be coated with varnish - it can make it look big, and at the same time save the farb from the dressing. With a "rough" style, it is possible to pick up several types of Farbi, but three types of images can be seen as one of one type. Tse to break such a stinu nature.

It can be seen that the pseudo-tseglyanu wall is not the same as the fold with its own hands. For the sake of accuracy, the whole process of presentations on a distributed video.