Yak rozrіzati sklo sklorizom: correctly to the robot in the minds of the house

At any apartment it is possible to connect with the need to replace the skylight at the windows, the doors of the shafi. Pidibrati are ready for the size of the required size to come out even more roughly. Zvychayno, you can turn for help to the fakhivtsya, ale tse take away an hour and a penny. All the necessary robots can be victorious with their own hands in the minds of the house, like the nobility, since it is correct to grow up.

Yak correctly go

Maystri sklyanoy please please at the vibration of the beast I respect at such moments:

• One sign of a high-pitched slope є blakitny or greenery of the top of the end.

• Do not slid vikoristovuvati podryapanі sheets.
• Even in the process of heating the slope, or even when it is cold, all the rules are not taken into account, so the leaves can be defective in the eyes of the smogs. The color of the dark is meaningful to the image, so for replacing the slope at the window, such leaves are more beautiful than vikoristovuvati.
• Tovschina storehouse lay in the form of rams, into the yak it is inserted. Yaksho її width and height less than 600 mm, you can get by with a 2–2.5 mm slope. And even if one of these parameters changes 600 mm, then the thickness of the sheet of the fold increases to 3.5–4 mm.
• It is necessary to cut the slope by 3-5 mm smaller than the size of the ramies, so the one who knows the difference will not allow inserting the slope into the hole.

Warehouse preparation

Oftentimes, it’s just a matter of forgetting an important moment. Ale yakisne skla skla with my own hands is uncomfortable without first preparatory work. Wipe the new slope with a vologo ganchirkoy. For that, wipe it dry.

Sklo, even though it was already near the victorian, is much more expensive and requires more retailers' preparation. Х miyut іf from the collection of special missions, and when drying out, I will go for extra turpentine or extinguish. In the process of hanging up, it turns out that the saw is hit on the sheet.

Reconstruction of the tool and the area of ​​the working mission

Persh nіzh mіrkuvati about those, as it is correct to use the problem, it is necessary to use the tool, which is available for the whole specific robot. In order to sculpt a sheet of paper with your own hands, it is most common to vikoristovuyut skloriz. There are three types of skloriziv:

• rollers;
• diamond;
• olіynі.

We will stay two victorious to be rewarded by professionals. The cheapest and most popular option is the price of skoriz with winter rollers.

Independently from the model, in front of the team, it’s better to change the skloriza. For tsiy it is possible to try to develop a non-consumable shmatok of the skla. In the ideal, the skloriz is guilty of collapsing with a light rustle, overflowing without interruption in a thin line. It’s like it’s going to collapse with a creak, the line is getting overwhelmed, or it’s a bit of a mess, or a blunt rying element, or the admission of pardons in technology development.

It is also necessary to prepare a flat surface, the dimensions of which are guilty of changing the size of the leaf, so that it can grow. At home minds there can be a lot of style, covering with soft cloth. In case of insufficient dimensions, the table can be placed on top of a sheet of plywood or chipboard. Also, a marker and a tape measure are known for the size. As soon as you wind up with a flare, then you need to prepare a good metal line. This is the fault of 8-10 mm - just so insert the necessary emphasis for the practical tool.

The yak is correct

If you can clearly see it with your own hands, you need to take care of the technology and the end of life.

• On the arkushi namіchayut points on the cob and kіntsya rіzu.
• Skloriz put a point at the cob and put it to a new line.

To brutalize respect! The line is guilty of roztashovuvatisya not by line of rozriz, but on the basis of a small number of milimeters from ny. The magnitude of the change in visibility to the weather on the same surface.

• Carry out the rice smoothly, from the cob to the end with one hand and one zusilli. It is more than once. As soon as you spend one minute at a time, it’s just a bit of a problem.
• Viroblyayut the chip of a detached shmat. For a whole line of thought, eat from the edge of the table. Viclikyut a trice, lightly rapping with a sklorizom, and then break it down in one fell swoop.

• If it’s an uneven chip, then you can see it with pliers, or speed up with special virizas in the handle of the skloriza. Schob uniknuti roztrіskuvannya, lіnіyu rіzu need lightly soak with turpentine or gas.
• At the final stage of the line, the sprout is covered with an emery paper, an oxamite file or a grindstone.

I can still see the slope

How robiti, how can you skoriza by hand? There are ways to use a non-standard tool. The whole operation can be done with a soldering iron, Bulgarian, nichrome thread and with extraordinary knives! Z'yasuєmo, yak correctly cut the skin with your own hands with your skin, from these methods.

• For the help of a soldering iron. With a handful of filing to shake off the strain on the cob and in the end of the line. Then, according to the whole line of demand, carefully carry out a good program with a soldering iron. Due to the temperature difference on the sides of the surface, the slope is tricky, because of which it will become too tightly vidlamati.
• Bulgarian. It’s not surprising that it’s been attached to the robots with a flap. In order for the Bulgarian to cut the slope, a thin diamond disc is needed. On the other hand, along the whole line of development, a thin furrow is afraid, for which a chip will be seen. Ale, with a growing Bulgarian demand for quilting, so that the slope does not overheat, and it’s obov'yazkovo vikoristovuvati rіdina, scho cholodzhu. A necessary garnishing tool, it’s easy to get out of hand. Obov'yazkovo with a robot for a Bulgarian on the slope of the need to clean up the organisms of the eyes. Getting into them with a dumb-bell saw will not bring anything good. If you want to make a sheet with a bulgarian, you need to stock up on eyepieces and a respirator.

• Vikoristovuchi loading and cooling. Along the line, lay the thread, leaked by the flammable speech, and fired. Immediately, as it fades away, the line starts to cool down for additional water. Due to the sharp temperature drop, it tends to grow. The first option is to heat the slope with a nichrome thread, through the yak to pass an electric stream. In general, water is not required, there is enough temperature difference between the two surfaces of the sheet.
• Knives. It’s not so sloping up to 3 mm, it ryzhatsya with extraordinary kravetskiy knives, as if robbing the operation, having pinned the knives that slope into the womb because of the hot water. We see the process of making a cardboard box.

Processing of the grooved slope

Often on the forums there is food: how can you grow up? The idea is simple: it’s hard to build or drill. For whatever it is, try to kill the price, you involve all your power and just go out on other little things. They used to be victorious in cars before they went through the "triplex" technology. In case of an accident, the ulamki of the slope did not harm the passengers. So it’s not a matter of course, and it’s not easy to use it as a tool.