Yak to lay the nun with tiles: instructions

It is unlikely that there is such a gentleman, who thinks, that he will be able to cover the walls above the ground, and are only available for a price of covering material. And even if it is competently to plan the power-by-hand installation, then the sporuda will not only be snatched away from the young scoundrels, but they will allow them to sacrifice the sutta sum of their worth.

Pick up the qualities of an innovative material, which is a nasty tile with a bituminous base (I call it a covering tile). Obviously, this kind of dakh cannot be called the simplest for independent development. However, it’s not very good. You don't need to go to the technological wisdom of the installation, and as such a robot will be completely real.

Innovative material

Gnuchka shingles є small size of flat sheets. This is one figurniy edge. The yogo basis, as a rule, is є scloptane or fleece. However, there are some kind of ugly tiles, which are prepared for organic cellulose, so that they are better. The basis of such a covering material from two sides is covered by a warehouse, which will leak, the main component of which is bitum.

The face's part is poached with a basalt granulator to be hardened at the top of the colir. Hourly yak barvnik vistupaє mineral krykhta. The same color of shingles gives special technologies, the staff of which win should last for ten years. The pinching, as the presence on the covering tiles, gives a large, beautiful view, and also preserves the surface of the old atmospheric conditions, which causes the weariness and neutralizes the negative effect of the ultraviolet.

For an hour, you can spend an hour as well, but in some places, you can simply walk away. Such a defect can only be trapped with materials in the economy-segment, so it’s easy to stick it in with the help of glue that is of a mineral type of color.

Positive characteristics and shortcomings

Gnucks with tiles can be placed on one-and-i bagatoschilias. For the fact that the material is small and small in size and low in plasticity, it is simply indispensable in case of coverings of folding forms (bagatoschilic, dome-like, round). Besides, there is a wonderful view of the booths of the new architectural styles.

Among the positive qualities of flat tiles you can see:

• good fortune (about 30 years);
• a significant range of working temperature, which permits the vicorists to use such material in both pivdenny and pivnichnyh lands;
• durability up to ultraviolet;
• non-vibrancy to a special look;
• ease of installation, which allows you not to get specials;
• small wag, it is easy for a yaku to vitrify croqui of a small repetition;
• there is a small number of inputs that are lost for editing;
• high-quality maintenance;
• good adherence to the change in the geometrical state of affairs, as well as to be seen at the estate;
• Possibility of vitrimuvati strong vіtru vіtru (with additional strengthening for 6 flowers);
• good heat-absorbing and sound-insulating power;
• strength to acids, as well as to negative inflow of lichens, moss and fungi.

The next few days to get overwhelmed:

• visoka partiality;
• more vitra of materials required for cleaning the sieve.

Why do you need to install the cover?

M'yakiy material for dakhіv stasis for schilіv with wicked ponad 12 vіdsotkіv. As soon as the coating is flat, then there is a great deal of leakage in the sticks. Yak to lay a trick with tiles at a time, what a bazhannya zastosuvati same її?

If the cover is too small, it is necessary to spread a special special podkladkovy kilim on the lattice, so that the top ball is taken away from the vology.

In the rest of the rock, the soft material gained great popularity. However, not all forgetful people know how to tiled the nest with tiles. Instructions for the installation of roses, but such material is to blame for the replacement of the sieves, as it is possible to see the difference, which is for metal tiles or ondulin.

Our own foundation, we mean for a sleazy tile, є mauerlat. On the new spiral of the crokvyana system.

Yak to put nnuchka tiles? Varto mother on uvaz, so not to love the inconsistencies, drops in heights, unnecessary zigin and tsvyakh, so erase. At the junction of the Mauerlat cim, the beams are laid strictly horizontally. At the same time, for the line, as it is necessary to draw the end of the mauerlat at the ends of the bud, it is possible to reach the end of 90 degrees.

Yak tiling the nun? For it, it is necessary to provide a suction basis, for it is necessary to beat the lattice from the gaps not exceeding 0.5 cm. In the first, a splendid pie of roofing from dull tiles is stored on top of a pair of steam-insulated ply croquettes, on top of which heat-insulating layer is laid. Dalі on the cover to change the hydro-insulating ply, OSB plate and pіdkladkovy kilim. The whole construction will end with a fine covering material.

How can you lay a nest with tiles on zal_zniy dakh? For all it is necessary to clean the surface. Obviously, a tricky tile can be laid on top of a dry material, it will look visually at the same time as the comb, and the appearance of the increased gaps for them will change the term of operation of many tiles. Vikoristovuchi option to wash the surface, lay the sieve over the laths from the slats or sheets of OSB.

Provided cover material can be made free. Easy to read lectures.

Sutsilna sieve

The first version of the base, as a form of grooved or grooved boards, is scraped upside down or with small gaps. Bazhano, a whole lot of doughs have been packed without zroshuvannya. At the time of the unhappiness of such rooting, the mice of sticky guilty is known over the crocs from the retreats of the land. Virishuchi food "Yak lay the nun with tiles?" In the first place, tiles are laid on such boards to accumulate water;

Covering slab material

Tiles can be built in a different way. In the whole fall on the lattice, the viconane from the unnecessary or obr_znoy boards, the blame for the laying of the slab material. Vin can be a vologost_yki OSB, CSP, GVL-plate or plywood. The thickness of such sheets is less than 9 mm.

Yak for a trick of a tile on OSB and іnshі slabs? Surely from the instructions, the padding is also scraped, so that the seams, rostasovani in one row, were crooked by the crochet. In order to compensate for the expansion at the temperature fluctuations between the suspended sheets, there may be a small gap (from 3 to 5 mm).

Special features for the installation of battens

Yak to put nnuchka tiles? At the same time, the material does not oppose mold and fungi, it doesn’t worry and it doesn’t rot. However, they will put them in the village, they will be able to get them for the advancement of their vologos. What do you need to have a link to the zoby? Effortless wood constructions are guilty of being crushed with antiseptic leaks. However, not all of them.

For this purpose, the tree has served as a whole, it is guilty of enlightening natural ventilation. For a wide range of hydro-insulating ball that base on the cover plate, it is necessary to make a gap of 5 mm. Hourly for tsoy vashtovuyut counter-grill, to which and fasten the base. Moreover, around the perimeter of the cover, open the special ventilation openings, rostashovuyuchi at the sides. To prevent getting in such a place, open the birds and close them with nets.

Features robotic at the time of rock

Yak to put nnuchka tiles? It is necessary to install it on a clean, dry and equal basis. At the same time, the robots should spend at the stage. Fix it up in the warmth of the time of fate, when the temperature is almost five degrees above zero. It is not possible to allow the article to be airtight, and to dissolve the lightness of the robot. Such a mind bazhano be aware of the fact that when sleepy exchanges get on the material, they see the development of a bitum. This process will allow you to fuse with the plates in one whole. Only, in such a way, it is possible to store it around the leaves, to be transformed into a monolith.

Yak tiling nnuchu with tiles? If necessary, it is necessary to carry out work during the cold season to get information about heat and heat. Only in such a way it is possible to develop the material so that the installation will come close to the last. It’s not easy to lay the nest with tiles in severe frost, wind it up with your hand є obigrivachi. To ensure that there is no downtime for the robot, you can start assembling the alarm structures of the wood flooring and the installation of heat insulation.

Dodatkova hydro-isolation

Tse the first step to the installation of flexible tiles. The ball of additional hydro-insulators should be laid in rosettes, bridles, and also in monsters, which are added until awake, on kovzans and mansard windows. Such a ball will become pre-paid insurance from the traffic, which will make it possible to purchase the most water.

To attach the hydro-insulating kilim with covering flowers with a crocus of 40 cm. Along the lower edge, the tsia is guilty of a bigger one (10 cm). On the first ball of maє buti of other pledges. In people, de є concatenated with a wall with a pipe, the material is guilty of going on them by 5-10 cm.

Tse zavdannya does not stand in front of timi, hto virishu nourishment "Yak, lay your hands on the tiling on the arbor with your own hands?" Aje trumpet in tsyom vipadku simply will not.

Installation of cornice and end strips

A whole other step is robust for laying down the dull tiles. It is necessary for securing the ends and cornices from the back of the water. To preserve the material of the covering, it is necessary to fill the cornice strips for the entire covering. Їх to fasten flowers, to hammer through the skin 10 cm. Moreover, one of them is guilty of rooting at the bottom of the bar, and the other - along the top, and so far. Suspended planks fit with an overlap of 5 cm.

Behind the same scheme and with the same interval, the end strips are flashed. We will fix the installation at the lower part of the dakha, and we will move to the kovzan.

Laying the valley kilim

At mіstyakh, the slope of the cover (in the rosette) is deactivated, the special zhisny kilim is guilty of the installation. In a new region, in a hydro-insulating area, in a connection with the necessary sink of slopes, to pass significant streams of water. The ndovy kilim is guilty of the spikes from the top to the bottom and the attachment of flowers through the skin 10 cm.

Fixing the cornice plank

The quarters of the stage of the laying of the dull tiles are easy to see. Tsei material is similar to the main one, but it doesn’t work with the whole figurine lower part. The cornice plank є is the starting one for the formation of the lower edge along the entire perimeter of the line. The robots of this stage must not be missed by these gentlemen, who will be able to feed the food "How can you lay a nest with tiles on the alcove?"

From the sides of the smog, there is a waterfall. It is necessary to take that dimension of the Danish element, having entered the space from the eaves of the cornice strip 1-2 cm. Dales are nailed at the perforation points along the edges.

Installation of tiles

The chain of ideas is a step-by-step process of robustness from the covering of the cover. Prepared in advance of the packaging with the tiles, they are guilty of being guilty for the first time or in the vicinity. During the installation itself, I will transfer it until awakening, I will continue. Varto mati on uvaz, scho material in small packs, as a rule, three of them are used for their color. It is recommended to open 4-6 packs at a time for a zvyazyka. Take the leaves from them as needed. At such a time, the coverings are much larger, and the smog of the young ones is not particularly visible. Qia umova is a viconan, and in that case, if you see the food "Yak, please, do the tiles on the dakha?"

Stacking the material is repaired to the center, step by step re-sueved to the ends. The lower edge of the first row of tiles should be roasted on one level with the cornice blush. The upper edge of the dull tile can be rolled over the taku smuga on a circle of centimeters.

Konik

The final stage for the installation of flexible tiles. Konik zakryvayut the painting of all skates with covering material.

On the whole stage, special tiles are stashed, or the row is drawn on the edge of the fragment. Another option is the cheapest one, even the price of special ridge tiles for extra special ridge tiles.