Yak pick up the box?

Yak pick up the box?

Visuvny boxes are the best choice for making speeches. However, it’s okay, if you knew it, grab the screen with your own hands. It is easy to pick up this type of box, as well as a briefly described installation.

Vibir strained

Persh nіzh goes over and over before folding, you need to vibrate directly for the screen. The main criterion for selection for tension to metal. Often, in a set with a box, a wire box doesn’t give a straight line, so you don’t want to bother with something short; Vibrating between roller and bag strains, zupinit on the rest, a bit of the stench of mint.

Enter that design

Now it is possible to understand the technological development, as to serve us for the establishment of the shuhlyad. Find out the correct rules for the design and access, which then follow for the successful installation of the screen.

• Perche, the width of the visuvnoy shuhlyadi is to blame for the butti 26 mm less than the opening. In such a rank, from the skin side, it is necessary to make an opening of 13 mm.
• The height of the visuvnoy screen is to blame for the 40-50 mm mensha, below the facade of the screen;
• Dovzhina of the box is guilty of giving them a straight line, if only three are less than them.

Now you can see without the front folding of the visible screen

Folding the visuvnoy screen

Be like a box with a side and bottom. For the cob, we need to get the chotiri sidewalls at once. For tsogo you can choose a special form, as you can use all the sides at once, as long as you do not have such a form, then you can go to the help of іnshoi people.

To fold the hanging screen, we need to know:

Attack mo before the start:

1. Flatten the sidewalls, drill two openings at the ends for an additional screwdriver;
2. Close the screws in the holes;
3. To do this, take out all the sides, take a sheet of extraordinary plywood, for whatever material, like the bottom of the box;
4. Bring a piece of plywood for an additional electric jigsaw. Do not forget to use a tape measure in front of the width of the plywood so that the drawer is shut up like a crush.
5. In order to close the bottom of the box, it is more beautiful than vicoristovuvati tsvyakhi. Beat the flowers around the perimeter of the box, so that you can secure the bottom with additional screws;
6. Dal zalitsya deprived of zakrypiti directly on the two sidewalls and stand the box.

Significantly, if you don’t wear an electric jigsaw, you can quickly do it with a knife. However, be respectful, to that її її slіd vicoristovuvati even more carefully, so that you don’t see a crooked bottom. Vikoristovyte roulette and olivets, schob namititi contour. You will also know what a hair man is. If you have the ability to speed up your partner's help - go.

Do not use a file for cutting the bottom to the teeth, so you should trim the plywood from the jagged edges, as it will be important to close it. As an alternative version of plywood, you can choose one board, for example, with veneer. Ale, remember, that you are unaffected by your taste, you can break the box with a big bulky one. More beautifully, speed up with a snake inch board.

If you don’t transfer the handle for the drawer in the kit, or if the delivery set includes a handle for one side of the wall, it is recommended to install the handle for the drawer, so that all the sides will be picked up.

All details you can visit at the wake-up shop.

Obviously, when you come across the crates for the extraordinary chest of drawers, you can easily break the crates of those types. For example, shipment or wood screens for tools.