Yak prikrіpiti nіzhki to the stіnitsі with your own hands

Yaksho style is hitting, it means that it has been tied up.

Style: material, technology of preparation, diagrams, designs - simple and folding

As far as nothing is concerned, it isn’t shitty, її it is possible to know the gluing. Ale, if you want melodiously for the day, change the tie.

Gaps between the legs of the table and the frame of the strapping, creaking, cracking of the table, etc. are signs that the construction of the strapping is not in order. There, de weakened the work, the glue is no longer trimmed, it has become a sturdier and more reliable repair.

As soon as the strapping is unstuck, you can't do without picking up all the designs, so if you just add the glue to the gaping lines and I know the frame, you won't be comfortable. The glue is required to do this, de contact areas, i.e. in the groove and on the bichni surface of the thorns.

I want in the castle construction weakened even more, it is not so easy to see a part of one in one hour. Do not knock anything, do not play, you need to pick up a hammer and vibrate with short, slightly strong blows of the thorns from the grooves. It’s glued together, I know it’s trimmed, and then I’m scrambling the old ball with glue and I see some excess mastic or varnish, like a stink є. Apply a new ball with glue, stitch behind the timbers, the legs stood vertically and parallelly, and the strapping frame was NOT skewed. For the whole load of the steel with a little uphill on the flat surface and tighten the clamp equally and along the two sides. The glue is guilty of podsohnuti, the first time it is necessary to change the tying. Now we will have a good idea of ​​the tree (screwing down the metal cuts will not neglect the goodness and the good fortune). From a solid pine shmat or a hard breed, it is worth not less than half the length of the strapping. Kutochki may form the shape of tricycle tricycles, the tops of which protrude into the upper end of the table so that it is possible to adhere to one to one contact area. As a rule, the tops are violated under a straight kut. If all chotiri kuchka stood on the place, the sides should be covered with glue and bound with a tie. Dodatkovo it is possible to secure the construction with obliquely placed gwints.

1. Weakened from the "vik" of the old vitoneness of the style of rosipavsya. Ale that, who knows, how to restore the furniture, can create a miracle.

2. Tying the skrіpiti, and set the legs as far as possible with a straight cut.

3. If the glue dies are cleaned, glue the strapping, tightening with a clamp.

5. Fastening of the stick on the kuta of the tying. Can be used with gwents.

b. Now the strapping is absolutely mizna, it is possible to mount a stylus on it.

4. From the tricycle shmatka of the tricycle tree with the top of the table at the edge of the table.

7. If the style is worth, the cut is not worn.

Tools:

Hammer, clamp, chisel, vuzka knife, vikrutka

In a large number of modern kitchen sets, the lower modules are installed on the regulation of the lower part - to support and be covered with a single stylus. Behind the additional regulation, it is possible to compensate for the irregularities and earned the pidlogs, by the same way, by wrapping the back wall, curving the lower pedestals. Regulated supports for kitchen furniture in buildings, and can be made of plastic and metal, which can also be used for decorative purposes.

The plastic kitchen supports are not invisible to the gimmicky viglyad, but in the set with the lower part of the special clamps, the kitchen base is attached to the support. Kitchen set, installation on plastic nizhki, zakryvayutsya at the bottom with a decorative plinth, which at times can be used. If you bazhate overlap the nizhki open, then on the visible dilenki put up decorative metal nіzhki - support.

For one lower module with a width of up to 800 mm, fill up some kitchen supports. More furniture is needed on the wider and kutovs of the furniture. Also, if there is a vertical partition in the lower module, it is also possible to place the support before it.

Independently from the material, installation of adjustable supports similar to myself. Fasten the kitchen floor to the chipboard on a 16 mm self-tapping screw and one central bolt. Before Tim, as you stand up the kitchen nizhni, turn all the support in the very bottom position, so that I will twist it again.

kitchen with a plinth and on nizhki

Turn the bottom module over and proceed to layout. If you plan to close the bottom of the kitchen unit with a plinth, then along the front edge for the fixing of the lower parts, enter 80 - 100 mm. Try to keep an eye out, so if you stand at the table, your feet will not rest on the base. There, de nіzhki socle zakrivatisya will not be enough to go to the edge by 50 mm.

For fixing, installation of one kitchenette, go 50 mm from two sides, paint a cross and put a speck on the crossbar. Apply a kitchenette to the bottom of the module so that the point is aligned with one of the openings. The two іnshikh open the guilt over the lines of the painted cross. Tighten three screws by size, then screw the quarters. You can also go to the bottom of the list.

installation of kitchen dishes

Then, if you stand on the kitchen set with all the lows, proceed to the installation of the lower pedestals along the walls for additional level and adjustable supports. Cover the bottom modules with a steel plate.

Robimo is a beautiful and beautiful country style with his own hands

Reach the horizontal position of the stand, adjust the extreme lows of the kitchen set. Then the wyvern lost support, the stench stood firmly on the pidlog.

It is not easy to install food on the kitchen set with your own hands, for whom respect and accuracy is necessary.

The sliding table on the balconies or the loggia is even more rational. You can read a book for him. Sit with friends over a beer dance. Abo drink a cup of kawi.

The article is assigned to the most flexible constructions. Such tables are often stray from stationary. In the photo in the Internet in the unfolded mill and the first and the other are even more similar. Ale yaksho pride itself on, the transformer style is more practical. Winning the position and practically not borrowing space on the balconies or loggias.

There is a way to fold up at the side tables on one balcony. The stink of the folded viglyadi squeezes to the wall of the loggia. And the axis of the mechanism, which is based on the fixation of the stylus, is very different.

Transformations of styles with nizhkoy

Yak and in all advancing views (behind a vignette of tables with brackets) in the entire design of the wall hang on hinges fixed on the wall. If you show it horizontally, you just show it below. And that's all, the stylist is trimmed.

Nіzhki often shy around, not tied to the main part. As a rule, the smell sticks in the holes in the lower part of the wall. The essence of such a design is that the folds of the steel in the folded view hang as close as possible to the wall. Yogo pristіy even simpler and nadіine.

The support was not absorbed, the mechanism was thoroughly understood. They just screwed it to the bottom of the table. Such a support is, from one side, a hinge, and from the other - an emphasis. The support part is used for fastening screws of the laths of fastening to the vertical surface with screws.

Such nizhki can be baked to the wall. And fіksuvatisya in vіїmtsі stylnitsі. It seems that the essence of the snake does not change.

Table with sliding support

Support, as a rule, stationary ric.

Smell of a tricky shape or close to it і work like this itself and the upper part itself - on the hinges. As you move the cry, move the support to the side. Inodi її fіksuyut, for example, z'єdnannyam shkanti + perishing. Fixers can also serve as magnets or bags.

These tables are awesome and beautiful, but on the other hand, the stench is not so compact. We can read the table and the leg itself, we have such a table from the wall from the wall. For example, a table with a good lowering should go 2-3 cm beyond the wall, and a table with a flat support by 6-9 cm.

Tsya reznitsya is often opposed to such a transformer.

Steel on sliding brackets

Remaining ten years old, the industry began to offer mechanical brackets for the side tables.

The material for them, as a rule, is to serve as a zalizo, zvychayne zalizo, older stainless steel.

Kvіtіv zvichay not so abundantly in stores you can create black, bile, chrome mechanics. And the axis of the design buva is free of charge.

Pratsyuє table on brackets without hinges. Virnish, hinges є, ale realized the stench in the middle of the bracket.

One part of the bracket is fastened to the wall, and to the wall. At the moment of crunching the table, the mechanism rises to 90 ° and self-adjusts. The moment of fixing is neatly described on the porch. Tom marvels at the photo.

You need to pull up the hill or pull on the importance.

Wood kitchen style with your own hands

In an hour, the bracket can be lowered and can be folded into the furniture.

Found cheap brackets may stick. Krishka will not be able to fold at any time. At the end of the day, it’s possible to go to the table to open the mechanism.

Mechanism on gas shock absorbers

The new mechanism for the opening of the small tables appeared in an hour.

Our smart ones, attached cylinders with gas from the rear doors of the car in the field as a support for the side tables.

It looks like this: the wall hangs on the hinges of the wall. From it, there is a gas filling of the cylinder. I will fix the whole construction vertically, or a remnant, or like a cuff.

To bring the furniture into a working position, and simply open the tab. At the same moment the gas in the cylinder of the piston, and at the same time it goes up the hill.

The design is new and there are many advantages, such as: compactness (the cylinder is only 18mm in diameter), the speed of the display is only 3 seconds, the simplicity of the design.