Budivnystvo budinkiv with arbolita - plus and minusi

A modern turnaround to a low-surface environment for the transfer of materials from the minimum efficiency of heat transfer and simple technological installation. Arbolit, in the same wood concrete, in the whole world is brought to cims to vimogs, even for the heat transfer coefficient, the villages and bagatorazovy overturning the tsegla, concrete and cinder blocks are not needed. We have a few reports about the passages and shortcomings of the arbolit, the special features of life in the history of the material, and the people who saw them or they bought the booths from the arbolit and lived in them a little rock.

So also arbolit and yak yogo power

The basis of arbolit is kindly hung thyrsi, yaku vikoristovuyt for preparing wood concrete - a sum of tirsi, cement viscous and winter additives, which will dye the quality of the product. At the same time, when preparing wood concrete, it is poured in accordance with the forms and used for an additional vibrostol, for which to fill for 30-40 years. Then the blocks are ready to use from the forms and to fill in on a special maidan to collect the money, the whole process of borrowing up to 30 days, if the arbolite blocks, whether they are sized, are ready before the weekend. The managers of such technologies produce blocks of small sizes, such as stinovs, as well as partitions. Call for an hour to check the blocks to see the following sizes:

• dozhina 60 cm;
• width 5-25 cm;
• height 20-25 cm.

In addition, letting go and additional blocks, which allow you to get by without the need to store and save extra blocks. Before additional blocks, carry out kutov, halves and required forms. For such an approach, the buyer can choose the most suitable sizes of blocks. A wall of standard arbolite blocks with a thickness of 20 cm for its lower heat transfer rate is based on a 1 meter wall thickness, so the warm regions of such a booth do not require insulation, but in the cold regions there is a heat insulation for the future. For the price of arbolite blocks, it is possible to torn out with cinder blocks and zabutkovy whole, for the reason that it is necessary to drop vitrati into a normal booth. Another thing is that the arbolit is not big enough for the arbolit, and the base is dry thyrsa, for the reason why the foundation goes down to an absurd building, so for the budinks with the arbolit, the vicoristovuyu also the foundations, as for the trees.

The arbolit grows into steam-permeable steam, depriving three of the trees that go by, because in the booths, the optimal level of water is always expected. Because of the fact that the vology is not injected into the microbiality of arbolite blocks, there is no reason to fail during the transmission of the vologue. As the arbolitic block of chipping is from the dry tirsi, then its internal content is not yet critical, so the reason for such blocks is not to be afraid of frost. As soon as there is an arbolite of destruction from syrothyrsi and trickyness, then there is a great amount of energy, but through a bit of frosty winters it will take a lot of money, and even in the midst of negative temperatures in the middle of a new freeze and ruinuvate.

Arbolit is a very practical material, which is not afraid of fire, stiffness to decay and flatness, it is easy to transfer it to the rack. The staff of the whole arbolite booths can be found closer to the stones and tseglyan buds, down to the trees. Protest, like the booths, having fallen asleep in the zone of strong fire, or strong, she has fallen asleep in the middle of the booth, trying to lose the meaning of a part of the mind. And it’s a bit of a problem to see whether it’s good lightweight concrete and in a small world with solid, stone and gold-colored concrete. Booths from arbolita do not have special processing for catching from rot and platyavi, even if booths are not created correctly, because blocks are prepared from syroe tricky and thyrsi, then in them it is not easy to identify middles of fungal attack. For the whole vipad it is necessary not only to check out and substitute for the dilenck of the wall, but only to go in for the lowering of the value. The very same booths from the arbolit are even more vimoglivi to the hydro-isolation of the foundation.

Budding technology in arbolita

When starting a business with an arbolit, the standard procedure should be set, including:

• projecting;
• root foundation;
• construction of stin;
• building dahu;
• flooring pidlog;
• insulation;
• connection of the commune;
• internal and external revitalization.

Project

It takes an hour to design a warehouse for the power of the runt, for the construction of the parameters of the foundation. A clear foundation is more beautiful than a booth from a bar - a special feature. To start with the configuration of the room, the construction of the walls, the appearance of the insulation, the opening of the windows and the doors and the important parameters. Also, it takes an hour to design a number of that type of alarm materials. For example, in the outskirts of the Soviet Union of 20 cm walls, it is possible to get along without insulation, while in the Omsk region there is a minimum of walls, it is possible to get by without insulation, to become 50 cm. elements.

Foundations

The workers of a small mass of stiffness from the arbolita should be pressed onto the ground more or less less, less tseglyan, or even concrete structures, so for such budinks there is a bit of stitching, palovins of gwint and a combination of foundations. This allows us to seriously reduce the cost and laboriousness of robustness at the time of the foundation of the foundations for the concrete buildings. When the foundation is established, it is necessary to have special respect for the hydro-insulation and insulation, as well as the foundation, which is insulated, but less flowing into the temperature of the fall. For gidroizolyatsiya zasosovyut ruberoid or only, and for insulation pyoplast. As long as you are choosing to be insulated for the heat, then the foundation is insulated without a need.

Zvedennya stin

This is because cement is knotty when preparing arbolite blocks, but for laying the blocks, it must be made of cement based on cement. You can choose a traditional solution from one part of the cement and three parts of the cement, so whether it is glue or the breakdown of masonry, designed for blocks on a cement basis. Arbolite blocks are easy to cut with a sharp knife, and also with an electric or gasoline saw, so it is not difficult to store them on the go. Yak і, when buzzing from a cinder block, a leather third or quarters row with reinforcement, laid on all blocks with a ball of glue or a break of the masonry. The staff of the garniture of arbolite blocks, the installation of the doors is not difficult - it is not difficult to fasten for additional anchors.

The construction of the wall is repaired from the huts, the vikoristyuchu, the raven and the motorcycle tie, how to pull it between the extreme blocks, so that you can lay the blocks according to the strict line. In general, the masonry of arbolite blocks does not at all appear from the laying of slag blocks, cinder blocks, pine blocks or gas-powered blocks. The size of the masonry is to blame for the normal density, but the arbolite block has seen the oversize with its wagon. The laying of the walls must be carried out at temperatures below +10 degrees. Before laying the arbolite blocks, you do not need to wet them. It is not common for vyrobniks to deliver to the deputy director of the arbolite blocks, as they did not get the required performance. It is not possible to build a wall with such blocks, because the lower rows will be pushed by the upper ones and the shape of the wall will collapse. They brought some blocks, it is necessary to keep them in place and for 15–20 days, so that the stench will rise before laying.

Building a dahu, making it cool, connecting a communal and heating system

All the events are displayed as they are, as for everyday life from any kind of materials. Mauerlat dahu should be fastened to the upper blocks with the help of straightened screws, so that they can be used to get stronger ones. Both the obrob can be vykoristovuvatisya like plaster, and wood cladding or other materials, in general, universal arbolite. Insulation of arbolite booths is only called, the very technology of insulating is the same, as for wood (bar) booths. You can read more details about insulation in the article - Insulation of a booth from a bar is correct. Connecting communal services may carry out special services of communal enterprises, self-connecting up to great fines.